Tool chest drawers, organized for good.

Tool chest drawers are shallow and wide. A fitted insert gives every screwdriver, plier and bit a home, so you can see at a glance what's missing.

Example layouts

3D render: Screwdrivers and pliers drawer insert, 12 compartments, PLA Tough+ Black

Screwdrivers and pliers

12″ × 18″ × 2 1/2″ drawer · 12 compartments · PLA Tough+, Black · 2 locking pieces

Rows of narrow slots for screwdrivers, then pliers and cutters. Tough+ PLA handles shop use.

Open this layout in the designer →
3D render: Bits and small parts drawer insert, 13 compartments, PETG Glossy Red

Bits and small parts

12″ × 11″ × 2 1/4″ drawer · 13 compartments · PETG Glossy, Red

A grid of small bays with lids for driver bits.

Open this layout in the designer →

Measuring a tool chest drawer

Measure inside the drawer, not the drawer face, and watch for the slide rails and any liner. Tool chest drawers are often 2–3″ tall inside, so set the insert height just below the opening.

Shop-friendly choices

  • PLA Tough+ or PETG for impact resistance.
  • Heavy duty walls for drawers that get slammed.
  • Bright colors make a missing tool easy to spot.
  • Lids for bits, screws and small parts.

Wide chests

One piece covers up to 13.1 × 12.4 inches. A wider drawer is made in two pieces joined inside a divider, or filled with matching pieces side by side.

Questions

Is PLA strong enough for tools?

For storing tools, yes. For shop drawers that get slammed or sit in a hot garage, choose PETG or PLA Tough+.

Can I make foam-style tool outlines?

Our inserts use rectangular compartments. Size each one to the tool and add a label for a shadow-board effect.

More ideas

Measure, design, done.

See your insert in 3D and get an exact price in a few minutes.

Start designing →