FAQ
Questions, answered.
How big can an insert be?
Up to 13.1 × 12.4 inches (335 × 315 mm) in one solid piece, and up to 4.7 inches (120 mm) tall. That's the build plate of the Bambu Lab H2S printers we use. Bigger drawers, like most kitchen drawers, are made in two pieces that lock together with a hidden dovetail joint inside one of the dividers. From above you only see a hairline. You can also choose a single piece at the maximum size.
Is it one piece?
Up to 13.1 × 12.4 inches, yes: the walls, floor and every divider print together as one solid part. For bigger drawers we make two pieces. The designer puts the seam along a divider that runs all the way across, so the split follows your layout (it isn't always down the middle). That divider is printed a little thicker, and inside it a few dovetails lock the pieces together: lower one piece onto the other and they click into place. From above you see only a hairline. No glue or tools.
What material is it?
Two plastics. PETG, our standard, is tough and flexes slightly instead of cracking. PLA comes in 15 finishes from silk and metal to wood and stone. PETG comes matte (hides fingerprints), glossy (bright colors with a light shine) or translucent (see-through tinted plastic that glows in the light). Colors marked as special order ship 3 to 5 days later while we bring in the spool.
Is a printed insert better than a bamboo one?
For a drawer, yes. Bamboo trays are glued strips of plant fiber: damp utensils and spills can swell them, loosen the glue joints, stain them or grow mold, and they only come in fixed sizes that leave gaps. A printed insert is one solid piece made to your drawer's exact size. Water doesn't hurt it, there's nothing to come unglued, and you choose the layout. Our standard PETG bends a little instead of snapping and handles heat well. If you want a heavier feel, choose Heavy duty walls.
PETG or PLA?
PETG is our standard: tough, slightly flexible and heat resistant, so it's the safe choice for kitchens and anywhere warm. PLA is stiffer, prints crisp detail and comes in the most finishes (silk, metal, wood, stone, sparkle, glow and more). It's great for desks, dressers and bathrooms, but it can soften above about 55 °C, so keep it out of hot cars and garages.
Which fonts can I use for labels?
Six: Modern, Rounded, Slab serif, Script, Stencil and Typewriter. One font applies to all labels on an insert, and the 3D preview shows the raised letters before you order.
Can I put names or labels on it?
Yes. Click any compartment and type a label: "Screws," "Batteries," "Quarters," or your family name. It's printed as raised letters on the compartment floor, sized to fit. If the compartment has a lid, the label goes on the lid. Labels are $1 each.
Can a compartment have a lid?
Yes. Tick "Add a drop-in lid" for any compartment at least ¾″ across. The lid rests on a small ledge inside the compartment, sits flush with the dividers, and has a finger notch to lift it. Good for screws, coins and small parts. Lids are $2.50 each and print in the same color.
What are "scooped" pockets?
Every compartment can have a curved edge where the floor meets the walls. Small items like coins, clips and screws slide out with one finger instead of getting stuck in a corner. You can choose flat bottoms instead.
Why make the dividers lower than the rim?
Lower dividers make it easier to reach in and grab things, and the drawer looks tidier from above. The outer rim stays full height so the insert stays stiff.
What if it doesn't fit?
The insert is printed to the size you enter, less the fit gap you choose. Check your numbers with the measuring guide before ordering. If something's wrong with your order, email hello@designmydrawer.com with your order number and a photo.
How long until it ships?
Most inserts print in 3 to 7 hours and ship within a few business days. The designer shows the ship date and delivery options for your ZIP code before you pay.
How is the price worked out?
By size, height and number of compartments, and checked against the actual print time and material from our slicer. You see the exact price, shipping and sales tax before you pay.
How do I clean it?
Lift it out and wash with warm, soapy water. Avoid the dishwasher's heated dry and very hot water, which can soften PETG.
Can I order the same design again, or share it?
Yes. Each design has its own link. Use Copy link in the designer to save it, send it to someone, or reorder later.
Do you make inserts for businesses?
Yes, including matching drawers for shops, tool control and fleets. Email hello@designmydrawer.com with sizes and quantities for volume pricing.
Who makes DesignMyDrawer inserts?
We do. Every insert is designed by you, checked by us and printed in the USA on our own printers, then packed and shipped from our shop.