Measuring guide · 2 minutes

How to measure your drawer.

You need three numbers: the inside width, depth and height. Measure twice. Your insert is printed to exactly these sizes, less a small gap so it drops in easily.

drawer front WIDTH DEPTH corner radius counter or drawer above HEIGHT side view
Measure inside the drawer, wall to wall. Height is the clear space to whatever the insert would hit when the drawer closes.

1. Width and depth

  1. Empty the drawer and take out any liner.
  2. Width: inside of the left wall to inside of the right wall.
  3. Depth: inside of the drawer front to inside of the back.
  4. Measure at the bottom, the middle and the top. Use the smallest number. Many drawers taper, and screws or slide brackets often stick in near the floor.

Write fractions the way they read on the tape. The designer accepts 14 5/8, 14.625 or 371mm.

2. Height

Measure from the drawer floor up to the lowest thing the insert could hit when the drawer closes: the cabinet frame, the drawer above, or a lip on the drawer front. The designer keeps the insert a little lower than this by default. You can also make it shorter on purpose. A lower insert uses less plastic and costs less.

3. Corners

Wooden drawers usually have square corners. Plastic and metal drawers often have rounded inside corners. Pick the closest match in the designer (square, slightly rounded, rounded or very rounded) and the insert's corners will follow.

4. Choose a fit

Bigger than 13 × 12 inches?

One piece can be up to 13.1 × 12.4 inches (335 × 315 mm), the size of our printer's build plate. For larger drawers, the designer makes two pieces that lock together with a hidden dovetail joint inside a divider. Just enter your full drawer size.

Enter my measurements →